Using of Cavitation Disperser, for Porous Ceramic and Concrete Material Preparation

International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering 2015
Andrejs Šiškins, Aleksandrs Korjakins, Viktors Mironovs

Present paper describes method of obtaining clay ceramic foam (CCF) and foam concrete (FC), by direct foaming with high speed mixer-disperser (HSMD). Three foaming agents (FA) are compared for the FC and CCF production: SCHÄUMUNGSMITTEL W 53 FLÜSSIG (Zschimmer & Schwarz Gmbh, Germany), SCF-1245 (Sika, test sample, Latvia) and FAB-12 (Elade, Latvija). CCF were obtained at 950, 1000°C, 1150°C and 1150°C firing temperature and have mechanical compressive strength 1.2, 2.55 and 4.3 MPa and porosity 79.4, 75.1, 71.6%, respectively. Obtained FC has 6-14 MPa compressive strength and porosity 44-55%. The goal of this work was development of a sustainable and durable ceramic cellular structures using HSMD.

Keywords
Ceramic foam, foam concrete, clay foam, open cell, close cell, direct foaming
Hyperlink
http://waset.org/publications/10001371/using-of-cavitation-disperser-for-porous-ceramic-and-concrete-material-preparation

Šiškins, A., Korjakins, A., Mironovs, V. Using of Cavitation Disperser, for Porous Ceramic and Concrete Material Preparation. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 2015, Vol.9, No.5, pp.734-737.

Publication language
English (en)