Influence of Milled Waste Glass to Clay Ceramic Foam Properties Made by Direct Foaming Route

World Academy of Science, Engineering and Technology: International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering 2016
Andrejs Šiškins, Viktors Mironovs, Dmirij Goljandin, Aleksandrs Korjakins

The goal of this work is to develop sustainable and durable ceramic cellular structures using widely available natural resources- clay and milled waste glass. Present paper describes method of obtaining clay ceramic foam (CCF) with addition of milled waste glass in 5, 7 and 10 wt% by direct foaming with high speed mixer-disperser (HSMD). For more efficient clay and waste glass milling and mixing, the high velocity disintegrator was used. The CCF with 5, 7, and 10 wt% were obtained at 900, 950, 1000 and 1050 °C firing temperature and they have demonstrated mechanical compressive strength for all samples ranging from 3.8 to 14.3 MPa and porosity 76-65%. Obtained CCF has compressive strength 14.3 MPa and porosity 65.3%.

Keywords
Ceramic foam, waste glass, clay foam, glass foam, open cell, direct foaming
DOI
10.5281/zenodo.1124477
Hyperlink
https://zenodo.org/record/1124477

Šiškins, A., Mironovs, V., Goljandin, D., Korjakins, A. Influence of Milled Waste Glass to Clay Ceramic Foam Properties Made by Direct Foaming Route. World Academy of Science, Engineering and Technology: International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 2016, Vol. 10, No. 5, pp.572-575. ISSN 2010-376X. e-ISSN 2010-3778. Available from: doi:10.5281/zenodo.1124477

Publication language
English (en)