Zinātniskās darbības atbalsta sistēma
Latviešu English

Publikācija: Accumulation and Modeling of Particles in Drinking Water Pipe Fittings

Publikācijas veids Zinātniskais raksts, kas indeksēts Web of science un/vai Scopus datu bāzē
Pamatdarbībai piesaistītais finansējums Nav zināms
Aizstāvēšana: ,
Publikācijas valoda English (en)
Nosaukums oriģinālvalodā Accumulation and Modeling of Particles in Drinking Water Pipe Fittings
Pētniecības nozare 2. Inženierzinātnes un tehnoloģijas
Pētniecības apakšnozare 2.1. Būvniecības un transporta inženierzinātnes
Autori Kaspars Neilands
Māris Bernāts
Jānis Rubulis
Atslēgas vārdi drinking water pipe junctions, loose deposits, sedimentation of particles, local hydraulic losses, unidirectional flushing, turbidity curve, pipe fittings
Anotācija The effect of pipe fittings (mainly T-pieces) on particle accumulation in drinking water distribution networks were shown in this work. The online measurements of flow and turbidity for cast iron, polyethylene and polyvinyl chloride pipe sections were linked with analysis of pipe geometry. Up to 0.29 kg of the total amount mobilized in T-pieces ranging from DN 100/100–DN 250/ 250. The accumulated amount of particles in fittings was defined as J and introduced into the existing turbidity model PODDS (prediction of discoloration in distribution systems) proposed by Boxall et al. (2001) which describes the erosion of particles leading to discoloration events in drinking water network viz sections of straight pipes. However, this work does not interpret mobilization of particles in pipe fittings which have been considered in this article. T-pieces were the object of this study and depending of the diameter or daily flow velocity, the coefficient J varied from 1.16 to 8.02. The study showed that pipe fittings act as catchment areas for particle accumulation in drinking water networks.
DOI: 10.5194/dwes-5-47-2012
Hipersaite: http://www.drink-water-eng-sci.net/5/47/2012/dwes-5-47-2012.html 
Atsauce Neilands, K., Bernāts, M., Rubulis, J. Accumulation and Modeling of Particles in Drinking Water Pipe Fittings. Drinking Water Engineering and Science, 2012, Nr.5, 47.-57.lpp. ISSN 19969457. Pieejams: doi:10.5194/dwes-5-47-2012
Papildinformācija Citējamību skaits:
ID 15236