This study examines the performance of reinforcements of 100 tex hemp yarns and hybrid yarns reinforcements with same hemp yarns and glass fibres’ (136 Tex) in warp direction (25 % or 50 %) interwoven with hemp yarns. The industrial loom CTБ-175 and craftsman’s loom, plain weaving technique for production of reinforcements with surface density in range of 91-246 g/m2 were used in the production. Tensile strength of hemp reinforcement on warp direction is 241.7N-279.8N and tensile modulus 218.48MPa-271.24MPa.The measurement of fabric thickness and physical-mechanical properties of reinforcements were carried out according to ISO 5084:1996 and LVS EN ISO 13934-1-2001 standards. One and two layer composites of woven reinforcements of hemp and polypropylene yarns were produced with Laboratory Press LP_S_50/SASTM. The surface density of one layer composite is 311.2 g/m2 and 608.4 g/m2 of two layers composite. The tensile strength of same composites is 303.1N and 599.5N, the tensile stress is 35.66 MPa and 40.65 MPa. The elastic modulus of one layer composites is 908.2 MPa and 1152.5MPa for two layers composite. The mechanical properties of composites were established according to ISO 527-5:2009 standard.