Modified Silyl-Terminated Polyether Polymer Blends with Bisphenol A Diglycidyl Ether Epoxy for Adhesive Applications

IOP Conference Series: Materials Science and Engineering 2016
Juris Bitenieks, Remo Merijs-Meri, Jānis Zicāns, Rita Bērziņa, Juris Umbraško, Uldis Rekners

Modified silyl-terminated polyether polymer (MS Polymer) was blended with bisphenol A diglycidyl ether (DGEBPA) epoxy at MS Polymer/epoxy ratio from 30/70 to 70/30. MS Polymer/epoxy systems were examined for two-component adhesive formulation with additional fillers. Applicability of the MS Polymer/epoxy system at the ratio of the components 60/40 is demonstrated for the development of adhesive formulation. Rheological analysis of the components A and B shows suitable viscosity values for development of two- component adhesives formulation. Curing dynamics as well as tensile stress-strain properties and Shore A hardness of the chosen adhesive formulation are reasonable for the development of MS Polymer/epoxy type adhesive.

Atslēgas vārdi
-
DOI
10.1088/1757-899X/111/1/012017

Bitenieks, J., Merijs-Meri, R., Zicāns, J., Bērziņa, R., Umbraško, J., Rekners, U. Modified Silyl-Terminated Polyether Polymer Blends with Bisphenol A Diglycidyl Ether Epoxy for Adhesive Applications. No: IOP Conference Series: Materials Science and Engineering, Latvija, Sigulda, 16.-18. septembris, 2015. UK: IOP Publishing, 2016, 012017.-012017.lpp. ISSN 1757-8981. e-ISSN 1757-899X. Pieejams: doi:10.1088/1757-899X/111/1/012017

Publikācijas valoda
English (en)